Made in USA
Manufactured and made in California
High Quality
Lasts 10 to 15 years if not longer
Blocks EMF radiation
Blocks 98% to 99% of the EMF emissions
EMF Experts
20+ Years of EMF Expertise
Won't rust or leak
Made of high grade 316 stainless steel
Fast Shipping!
Same or next day by 2-Day Priority
Shield Your Home
Blocks the EMF in your whole house
No Drilling Required
Easy to install/no assembly required
Videos
-
Smart Meter Guard
-
You Can Block Smart Meter Radiation
-
EMF Radiation Blocked! Smart Meter EMF Radiation Protection
-
Smart Meter EMF Blocked Inside the House
-
Smart Meter Cover VS. Smart Meter Guard Performance Comparison
Specifications
Dimensions
- Diameter: 7 ¼"
- Height: 4 ½"
Installation
Installation Video
Smart Meter Guard Installation Instructions
The Smart Meter Guard fits all smart meters in the US, Canada and Central America. There are slight variations of how smart meters are mounted but the Guard will fit each one with small differences. Here is an installation guide to the different configurations of smart meters.
-
Utility Box “Type 1” Installation:
This is the most common type utility box. Simply place the Smart Meter Guard over the smart meter on to the metal ring at the base of the smart meter. Then tighten the securing screw with a Philips head screw driver so it is snug. You’re done!
-
Utility Box “Type 2” Installation:
This is the next most common type of utility box that has a lock or clamp on the metal ring at the base of the smart meter. The Smart Meter Guard has a notch in the rim that fits right around the lock or clamp. Cut the metal mesh at either end of the notch with scissors and bend the mesh up. Place the Smart Meter Guard over the smart meter with the notch over the clamp or lock. Then tighten the securing screw with a Philips head screw driver so it is snug and you’re done!
-
Utility Box “Type 3” Installation:
This is the least common utility box where the metal ring at the base of the smart meter is covered by the utility box lid. In these cases you will need to use one of the two rubber “spacer”. No need to request a spacer, they are included in each order with free. The spacer fits on the inside rim of the Guard that allows it to cinch down around the glass of the smart meter instead of the metal ring that is covered.
Note: The Smart Meter Guard is meant to fit snug. If it doesn't seem to fit over the metal ring
at
the base of the smart meter please remove the nut and screw. Then gently stretch open the Guard. It's
made
to stretch. Place it over the metal ring at the base of the smart meter and put the screw and nut back
on
and tighten until snug.
For help or questions please email us at info@smartmeterguard.com.
Product Data
Testing the Smart Meter Guard
Our advice is that if you don't see real time data that shows a product blocks RF then it probably
doesn't.
This is why we have several real time videos showing the Smart Meter Guard blocking the RF
To test the effectiveness of the Smart Meter Guard, which is a custom Faraday cage that blocks smart meter
RF waves, we performed several tests on a number of smart meters in different locations. The results were
verified in each case by accurately measuring the RF waves emitted from smart meters. The RF waves were
measured in micro watts per square meter (uw/M2), before and after the Smart Meter Guard was installed.
In each test we used a GigaHertz Solutions HF35C High Frequency Analyzer with a 20 decibel attenuator. The
20 decibel attenuator on the HF35C analyzer allowed us to measure the total power density output from the
smart meters.
In each test, installing the Smart Meter Guard lowered the power density output of the smart meter from
the
15,000 to 54,000 uw/M2 range to less than 60 uw/M2. We measured both outside of the house and inside of
the
house and got the same results, no RF waves.
To view a video of this test please visit this URL:
Before & After Test Data
Why Radiation Doesn't Come Out the Back of the Utility Box
Your electrical utility box is made of and completely surrounded by grounded metal, including the back of
the box. The only part of your electrical box that is not grounded metal is the glass part of the smart
meter. The glass part of your smart meter is where the RF waves are transmitted from and they're not
directional. The RF waves radiates everywhere but can not penetrate grounded metal. Once the Smart Meter
Guard is installed it covers that last part of your utility box that is not grounded metal. Once the Smart
Meter Guard is in place the high frequency radiation can not escape your utility box and all the radiation
is contained.
Here is a simple analogy. Say you have a sound speaker and you put it in a sound proof box that has a hole
in it. When you turn on the sound you heard the sound, even from the back of the box. Now, if you cover
the
hole in the sound proof box you the sound can not escape and you won't hear the sounds. The Smart Meter
Guard basically "covers" the hole in your electrical utility box with a "Faraday" cage.
RF radiation is very similar to sound waves except it's dealing with high frequency radio waves and
grounded
metal.
Testing the Radiation Levels Inside the House
We have done extensive testing of the radiation levels inside the house with the Smart Meter Guard
installed.
To view a video of this test please visit this URL:
Our Guarantee
If you are not satisfied with the fit or performance of the Smart Meter Guard you can return it for a
full refund within 30 days. Our goal is to make sure our customers are satisfied with the product and know
they are shielded from the RF waves emitting from smart meters.
For more information please email us at: info@smartmeterguard.com
You may also like
Testimonials
See what other our saying...
You guys are providing such an incredible service to people's health and maybe even their lives. I honestly didn't know if this guard would work. But I was desperate. I can't believe the quick improvement and I am so grateful. Thank you! And I will try to convince anyone who will listen to me to get a guard.
Lee Peterson, Colorado
Verified Buyer
I highly recommend the Smart Meter Guard because I do notice a difference in the quality of my sleep and I have only taken care of one of the smart meters, namely the electric one. Most importantly, I have received excellent support from Karl who has answered all my questions via email plus he is helping me out construct a guard to cover my gas smart meter.
Sue Draper, Oregon
Verified Buyer
I can literally feel the difference in my house. I am not as tired. I sleep better. My mood is better. Only problem is, I don't like to leave the house because every place else feels crappy! Wow! Thank you! I am sharing your information with others!
Lance Nielson, Idaho
Verified Buyer